Current-to-Voltage Converter: Often a Precision Metal Film resistor is used to convert current input to voltage.
Integrator: Operational amplifier (op-amp) configured with capacitor and resistor for integration.
Comparator: Compares the integrator’s output with a reference level.
Pulse Generator/Monostable Multivibrator: Creates a clean digital pulse when the comparator triggers.
Reset Mechanism: Resets the integrator after each pulse.
RMG-PC 90-0092L is a Loop powered 2 wire Position Feedback Transmitter, widely used to transmit the position of a Power Cylinder in a variety of process control applications. This contactless Inductive LVDT based Position
Transmitter is a 24V DC operated, Angular Position Transmitter designed for both rotary as well as linear movements when coupled with suitable Back Lever and associated hardware.
This Instrument complies with Ingress Protection as per the relevant IS/IEC standards.
RMG-PC 90-0136L is a Loop powered 2 wire Position Feedback Transmitter, widely used to transmit the position of a Power Cylinder in a variety of process control applications. This contactless Inductive LVDT based Position Transmitter is a 24V DC operated, Angular Position Transmitter designed for both rotary as well as linear movements when coupled with suitable Back Lever and associated hardware.
This Instrument complies with Ingress Protection as per the relevant IS/IEC standards.
RMG-HPT2W-EX-IS-2018 is a Loop Powered 2 wire Position Feedback Transmitter, widely used to transmit the position of a Control Valve / Power Cylinder / Electric Actuator in a variety of process control applications. This equipment is Ingress Protection and Intrinsic Safety certified and qualified for use in hazardous environments as per the relevant IS/IEC Standards.
RMG-HPT2W-EX-2018 is a Loop powered 2 wire Position Feedback Transmitter, widely used to transmit the position of a Control Valve / Power Cylinder / Electric Actuator in a variety of process control applications. This Instrument is certified and qualified for Ingress Protection and for use in Flame Proof/Explosion Proof areas and environments as per the relevant IS/IEC standards.
Electronic Positioner RMG-POS-SPL-1530-2016 is an intelligent positioning unit using state-of-the-art technology for low cost positioning of electric actuators and a host of other customized applications.
INTELLIGENT ACTUATOR CONTROLLER, RMG-IAC-2012, has been designed to provide the Intelligent Control Electronics that is required for the next generation Electric Actuators. This micro controller -embedded unit incorporates state-of-the-art electronic controls with field configurable features.
RMG-UPT-EX-0501 is a Loop powered 2 wire Position Feedback Transmitter, widely used to transmit the position of a Control Valve / Power Cylinder / Electric Actuator in a variety of process control applications. This Instrument is certified and qualified for Ingress Protection and for use in Flame Proof/Explosion Proof areas and environments as per the relevant IS/IEC standards.
RMG-LVCAM-2090-01 is a 2 wire Position Transmitter, widely used to transmit the position of a Control Valve / Power Cylinder in a variety of process control applications.
RMG-HPT-2W270-01 is a 2 wire electronic position transmitter capable of transmitting precisely the changes in position. The sensor used, which is a non contact type, is based on Hall Effect.
Angular Position Transmitter Model no. RMG- APT-2017, is a versatile, advanced Position Transmitter widely used to transmit the position of a Control Valve / Power Cylinder / Electric Actuator in a variety of process control applications. The Contactless Hall effect-based Position Transmitter is a 24V DC operated loop powered 2Wire System, with a 2-line Alpha Numeric LCD, designed for both rotary and linear movements when suitable linkages are used.
This Instrument is certified and qualified for [IP67] Ingress Protection as per the relevant IS/IEC standards.
Signal Isolator provides electrical (galvanic) isolation between the input and output circuits.This Signal Isolator requires 24VDC as the main supply and converts 4.00 to 20.00mA input signal to galvanically isolated 4.00 to 20.00mA dual outputs.
RMG-UPT-EX-IS-0501 is a Loop powered 2 wire Position Feedback Transmitter, widely used to transmit the position of a Control Valve / Power Cylinder / Electric Actuator in a variety of process control applications. This equipment is Ingress Protection and Intrinsic Safety certified and qualified for use in hazardous environments as per the relevant IS/IEC Standards.
Limit switch Assemblies are used in a variety of applications and environments on account of their ruggedness, ease of installation and long term reliability. They can determine the positioning and end of travel etc. of an Actuator/Control valve/Power cylinder.
Limit switch Assemblies are used in a variety of applications and environments on account of their ruggedness, ease of installation and long term reliability. They can determine the positioning and end of travel etc. of an Actuator/Control valve/Power cylinder.
Limit switch Assemblies are used in a variety of applications and environments on account of their ruggedness, ease of installation and long term reliability. They can determine the positioning and end of travel etc. of an Actuator/Control valve/Power cylinder.
Limit switch Assemblies are used in a variety of applications and environments on account of their ruggedness, ease of installation and long term reliability. They can determine the positioning and end of travel etc. of an Actuator/Control valve/Power cylinder.
Limit switch Assemblies are used in a variety of applications and environments on account of their ruggedness, ease of installation and long term reliability. They can determine the positioning and end of travel etc. of an Actuator/Control valve/Power cylinder.
Limit switch Assemblies are used in a variety of applications and environments on account of their ruggedness, ease of installation and long term reliability. They can determine the positioning and end of travel etc. of an Actuator/Control valve/Power cylinder.
Limit switch Assemblies are used in a variety of applications and environments on account of their ruggedness, ease of installation and long term reliability. They can determine the positioning and end of travel etc. of an Actuator/Control valve/Power cylinder.
Limit switch Assemblies are used in a variety of applications and environments on account of their ruggedness, ease of installation and long term reliability. They can determine the positioning and end of travel etc. of an Actuator/Control valve/Power cylinder.
Limit switch Assemblies are used in a variety of applications and environments on account of their ruggedness, ease of installation and long term reliability. They can determine the positioning and end of travel etc. of an Actuator/Control valve/Power cylinder.
Signal Isolator provides electrical (galvanic) isolation between the input and output circuits. They couple the signal to the output through a transformer.
RMG-2WRPT-2012 is a 2wire Electronic Position Transmitter based on resistive sensor inputs capable of transmitting precisely the changes in position. The sensor is a potentiometer and is used for transmitting signals proportional to the rotary / linear movements, resulting in resistance changes.
RMG-HPT2W-2018 is a Loop powered 2 wire Position Feedback Transmitter, widely used to transmit the position of a Control Valve /Power cylinder / Electric Actuator in a variety of process control applications. This Instrument is certified and qualified for Ingress Protection as per the relevant IS/IEC standards.
RMG-UPT-136H-21 is a Loop powered 2 wire Position Feedback Transmitter, widely used to transmit the position of a Control Valve / Power Cylinder / Electric Actuator in a variety of process control applications. This Instrument is certified and qualified for (IP67) Ingress Protection requirements as per the relevant IS/IEC standards.
RMG-UPT-0501 is a Loop powered 2 wire Position Feedback Transmitter, widely used to transmit the position of a Control Valve / Power Cylinder / Electric Actuator in a variety of process control applications. This Instrument is certified and qualified for IP 67 as per the relevant IS/IEC standards.
